MIT Plakalı ve Lehimli Eşanjörler - Eşanjör Dünyası ı|ı Exchanger World

MIT Plate Heat Exchanger - MIT Plate Heat Exchanger - MIT Plate Heat Exchanger

 Standard Design

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids betweenwhich heat transfer will take place. The plate pack is assembledbetweeen a fix frame plate and a movable pressure plate and compressed by tightening bolts.Theplates are fitted with a gasket which seals the interplate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The plate and the pressure plate are suspended from anupper carrying bar and located by a lower guiding bar, both of which are fixed to a support column.Connections are located in the frame plate or, if either or both fluids make more than a single..

Working Principle  

Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current fl ow is created for highest possible efficiency.

The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.  

Frame Types :

• Painted Frame with Carbon Steel Connection

• Painted Frame with Stainless Steel Connection

• Stainless Steel Frame with hygenic connection

• Stainless Steel Frame with threaded connection

Plate Types :

• Flow Plate

• End Plate

Plate Material :

• AISI 316

• Titanium

• CTX

Plate Thickness :

• 0,5 mm• 0,6 mm

Gasket Material

• NBR Clipped

• EPDM Clipped

• Slicon Clipped

• Viton Clipped

 Temperature Limits

NBR Gaskets: Max : 115

CEPDM Gaskets Max : 150

CSLICON Gaskets Max : 200

CVITON Gaslets Max : 225 C  

Frame Specifition :

Lenght : 480 mm

Width: 200 mm

Weight: 32 kg 

Length : 453 mm

Width : 144 mm

Weight: 0,26 kg ( AISI 316)

Angle : 30 Degree

Flow Type : Parallel

Gasket Type : Clipped

Connection : 32 mm

Gap : 2,3 mm

Max Flow Capacity : 14 m^3/h

Nom Comp. Pitch :2,85 mm

Plate Removal Distance: 120 mm

MIT Plakalı ve Lehimli Eşanjörleri - MIT Plakalı ve Lehimli Eşanjörleri - MIT Plakalı ve Lehimli Eşanjörleri